CANDLESTIX Candle Holder
Our Candlestix were designed to be used with Beeswax Candles, as they are soft and will mold to the point easily. Being a little sticky, the beeswax will adhere to the Candlestix and secure the candle.
Beeswax also burns cleaner and is dripless when not left in a draft.
Any beeswax candles will work, but to make it easier we sell our own, which you can find here.
To secure a candle, firmly hold the Candlestix in one hand and the candle in the other, and twist them together back and forth until the candle sticks. Then place them on a flat surface and adjust the candle so it is perpendicular to the ground.
Brass will naturally change color over time, due to oxydation. I happen to love the time patina, but if you prefer a bight finish, please follow these instructions:
Gently rub with a polishing cloth or spray with a metal cleaner and wipe dry using a soft paper towel or rag.
Be careful not to damage the leather disc at the bottom while doing so.
We recommend using Cape Cod® Clean Link which you can find here.
Leather is really resistant, but can stain and doesn't like water. To clean, use make up remover and a clean cotton pad.
* To remove wax from metal, rub a clean cloth with hot water, then wipe dry.